Hood Latch with Mounting Bracket - 90-Degree Mount - Stainless Steel
(11 reviews)
Price: $17.41
In Stock
Hood Latch with Mounting Bracket - 90-Degree Mount - Stainless Steel
Item # PLR284
Our Price: $17.41
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (11)
- Q & A (0)
- Videos (1)
- Photos
Polar Hardware Vehicle Trim - PLR284
- Hood Trim
- Stainless Steel
- Front of Vehicle
- Polar Hardware
- Silver
- Hood Latch
Replace the worn-out or damaged latch on the hood of your Jeep or agricultural vehicle with this rustproof stainless steel hood latch. Hook mounts at a 90-degree angle.
Features:
- Hood latch helps keep your vehicle's hood closed
- Ideal for Jeeps or agricultural vehicles
- 90-Degree mount allows hook and bracket to be positioned on the same plane
- Stainless steel construction is rustproof and corrosion resistant
- Simple bolt-on installation with 2-hole keeper mounting bracket
- Mounting hardware not included
- Made in the USA
Specs:
- Latch length:
- Free length: 3-9/16"
- Hooking length: 4-1/16"
- Extended length: 4-11/16"
- Mounting bracket dimensions: 1-15/16" tall x 7/8" wide
- Distance between mounting holes (center to center): 1-5/16"
284 Polar Hardware Hood Latch with Mounting Bracket - Vertical Mount - Stainless Steel
Video of Hood Latch with Mounting Bracket - 90-Degree Mount - Stainless Steel
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Review of Polar Hardware Vehicle Trim - Stainless Steel Hood Latch with Mounting Bracket - PLR284
Hi there, I'm Michael with etrailer.com. Today we're gonna take a quick look at this Stainless Steel Hood Latch with Mounting Bracket. This hood latch is gonna replace a worn out or damaged latch on your hood of your Jeep, or agricultural vehicle to help keep your hood closed. This does have a 90 degree mount that's going to allow the hook in the bracket to be positioned on the same plane. It is made here in the USA of a stainless steel construction so it is going to be rustproof and corrosion resistant. Very simple bolt-on installation.
The mounting hardware is not included, but that mounting bracket is right at two and one eighth of an inch long, by about one and one eighth of an inch wide. The distance between our mounting holes is approximately one and a quarter of an inch. And it'll be hard to show you but this does have a free length of three and nine sixteenths of an inch, a hooking length of four and one sixteenths of an inch, and then an extended length of about four and 11 sixteenths of an inch. So if you're needing to replace that hood latch for your Jeep or agricultural vehicle, this will do a great job for you. Now that completes our look for today.
Again, I'm Michael with etrailer.com. Thanks for watching..
Customer Reviews
Hood Latch with Mounting Bracket - 90-Degree Mount - Stainless Steel - PLR284
Average Customer Rating: 4.5 out of 5 stars (11 Customer Reviews)
Replace the worn-out or damaged latch on the hood of your Jeep or agricultural vehicle with this rustproof stainless steel hood latch. Hook mounts at a 90-degree angle.by: Gump01/05/2024
perfect fit fast delivery
by: Tom 08/23/2023
Right on time good company to do business with
by: John09/07/2023
by: J stang10/01/2020
Liked used happy with purchase
by: Ronnie09/22/2022
Brooke M.
10/6/2022
Thank you for leaving a review! It looks like we could have improved in some aspects. If you would like to add any comments to your review, I would be happy to assist you.
by: Tommy 07/27/2022
Excellent product and great services
by: Charles 03/02/2021
Great part, exactly as described!
by: Frederick 03/20/2024
by: Joseph 02/05/2024
by: Ben06/02/2022
by: Mike 07/11/2021
11
11
See what our Experts say about this Polar Hardware Vehicle Trim
- Mounting Hole Distance On Center for Hood Latch with Mounting Bracket PL284I checked with Polar Manufacturing and can confirm the center to center mounting hole distance on the Hood Latch with Mounting Bracket part # PLR284 is 1-7/16". I have attached a drawing of this for you as well.
view full answer...
- Does Polar Hood Latch # PLR284 Include Keeper Bracket The mounting bracket to actually attach the Hood Latch # PLR284 to the vehicle is included but the keeper end bracket (to secure the latch) is not. This can be added with part # PLR281.
view full answer...
Do you have a question about this Vehicle Trim?
Info for this part was:
Edited by:
Lindsey S
Updated by:
Wilson B
Updated by:
Mike S
Updated by:
Matthew E
Written by:
Amanda M
Installed by:
Michael B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Jenny N.
9/11/2023
It is very quiet on this review. If you have any questions or concerns please let me know.